?1999 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? @sensitron.com sensitron semiconductor technical data data sheet 331, rev. c ultra low reverse leakage power schottky rectifier very low voltage drop description: 200 volt, 7.5 amp, power schottky rectifier in a hermetic shd-1 or -1b package. maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating symbol max. units peak inverse voltage piv 200 volts maximum dc output current (w ith cathode ma intained @ t c =100 o c) i o 7.5 amps maximum nonrepetitive forward surge current (t = 8.3ms, sine) i fsm 140 amps maximum junction capacitance (v r =5v) (per leg) c t 150 pf maximum thermal resistance (juncti on to mounting surface, cathode) r jc 3.2 c/w maximum operating temperature range top -65 to + 200 c maximum storage temperature range tstg -65 to + 175 c electrical characteristics characteristic maximum forward voltage drop, pulsed (i f = 7.5 amps) t j = 25 c t j = 125 c v f 0.92 0.76 volts maximum reverse current (i r @ 200v piv) t j = 25 c t j = 125 c i r 0.05 0.5 ma reverse recovery time t rr 12 ns shd116136 shd116136b
?1999 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? @sensitron.com sensitron technical data data sheet 331, rev. c 0.0 0.2 0.4 0.6 0.8 1.0 forward voltage drop - v f (v) 10 -3 10 -2 10 -1 10 0 10 1 instantaneous forward current - i f (a) typical forward characteristics 125 c 200 c 175 c 25 c 0 40 80 120 160 200 240 reverse voltage - v r (v) 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 instantaneous reverse current - i r (ma) typical reverse characteristics 25 c 50 c 75 c 100 c 125 c 150 c 200 c 175 c 0 40 80 120 160 200 240 reverse voltage - v r (v) 0 40 80 120 junction capacitance - c t (pf) typical junction capacitance shd116136 shd116136b
?1999 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? @sensitron.com sensitron technical data data sheet 331, rev. c mechanical dimensions : in inches / mm shd116136 shd116136b shd-1 shd-1b disclaimer: 1- the information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. before ordering, purchas ers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety s hould be ensured by using semi conductor devices that featur e assured safety or by m eans of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user?s units according to the datas heet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of info rmation, products or circuits described in the datasheets. 4- in no event shall sensitron semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s ) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of sensitron semiconductor. 7- the products (technologies) de scribed in the datasheet(s) are not to be provi ded to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be ap plied to that purpose by their direct purchasers or any thir d party. when exporting these products (technolog ies), the necessary procedures are to be taken in accordance with related laws and regulatio ns. .090 (2.29) max alumina ring moly base (cathode) .060.010 ( 1.52.254 ) .015.002 (.381.051) .020.005 r (.508.127 ) .225.010 (5.71.254) .150.010 (3.81.254) .375.020 (9.52.508) .225.010 (5.71.254) .015.005 (.381.127) copper anode .225.010 (5.71.254) .075 (1.91) max a lumina ring .225.010 (5.71.254) moly lid moly base
|
